Drive belt fabric is a special material used in transmission systems. Let me introduce you to different types of drive belt fabrics and their characteristics and applications:

Flat belt:

It is made by bonding several layers of adhesive canvas, with open edge and wrapped edge styles.

High tensile strength, good moisture resistance, and affordable price; But the heat resistance and oil resistance are poor.

Suitable for medium and small power transmissions with large shaft spacing.

Braided tape:

There are cotton woven, woolen woven, and sewn cotton fabric belts, as well as silk, linen, and nylon woven belts used for high-speed transmission.

Good flexibility and low power transmission, suitable for medium and small power transmission.

Narrow V-band:

The trapezoidal section annular belt has a load-bearing layer of rope core or rubber curtain fabric.

Allow for small wrap angle, high transmission ratio, and low preload.

Suitable for transmissions with small axle spacing.

Synchronous toothed belt:

Trapezoidal teeth, a circular belt with a load-bearing layer such as fiberglass rope core and steel wire rope.

By meshing transmission, the transmission ratio is accurate, the shaft pressure is small, and the oil resistance and wear resistance are good.

Suitable for synchronous transmission.

Circular strip:

Circular cross-section, used for low-power transmission.

The structure is simple, and the minimum pulley diameter can be 20-30 times the pulley diameter.

Elastic fabric:

Used in fields such as automobiles, agricultural machinery, and industry.

It has the characteristics of high strength, large friction coefficient, and good flexibility.

In short, transmission belt fabrics have a wide range of applications in different fields, from small machinery to high-power transmission, which cannot be separated from their support.